<< Call Detail Records (CDR) on Call Manager Express | Installing a Valid Certificate and set up Autodiscover on Exchange 2007/2010 >>

Creating a loopback interface and bind CUCM to Call Control Protocols

by Ras 17. February 2012 21:59

Below configuration will create a loopback interface and bind Cisco CME to Call Control Protocols :

interface loopback 0
ip address 192.168.251.1 255.255.255.255
h323-gateway voip interface
h323-gateway voip bind srcaddr 192.168.251.1
voice service voip
sip
bind control source-interface loop 0

2a364c65-5359-4df8-a782-a8afda5b4bb8|1|5.0

Tags: cisco call manager express call control loopback

Cisco | Voice/Video

Call Manager Express initial configuration with FXO interfaces// // Here is a sample of configuration of Call manager express with fxo interfaces and dial-pee...Call Manager Express with BRI interfaces// // Call Manager Express with BRI interfacesBelow is an example of configuration of CME with B...Understanding the "SHOW INTERFACE SERIAL" command output details// // Below are the parameters that you would see when perform a show interface serial command: ...

Add comment

Name* Required Please choose another name

E-mail*

Country Country flag

5+5 =

b i u quote

Comment
Preview

Notify me when new comments are added

Creating a loopback interface and bind CUCM to Call Control Protocols

Related posts

Add comment

About the author

Month List

Creating a loopback interface and bind CUCM to Call Control Protocols

Related posts

Add comment

About the author

Month List

Newsletter

Thank you